POWER PRODUCTS

Jump to:
High Voltage Power Supplies

AC Power Sources

AC-DC Electronics EL300 Electronic Load, $ 200
Handles sources up tp 60VDC, 60A, 300W max.

DATEL TPB-5/5-15/1-D24 DC/DC Converter, 40 Watts Triple output, 24V $ 20
in, 5V@5A +15V@1A -15@1A outputs. Brand New. See Datel specs here.

ELECTRONIC MEASUREMENTS (EMI) EMTL488 GPIB Power Supply Programmer $ 50

INDUSTRIAL TEST EQUIPMENT CO. “Powertron” 250SCR DC Transconductance $ 295
Amplifier. Maximum output current is 25A @ 25V, with three input
gains (0.5, 1, 1.5 A per V), metered, rackmount, excellent.
ITE’s website: Industrial Test Equipment Co.

HP 59510A Relay Accessory, for remote-controlled relay switching $ 225
of DC power supplies or emergency fault shutdown.

HP 6002A DC Power Supply with option 001 GPIB interface, $ 395
0-50V @ 10A, 200 watts max. CV/CC, metered.

HP 6012A System Power Supply, $ 895
0-60VDC, 50A, 1000 watt max,  front panel or GPIB operation, rackmount.

HP 6023A System Power Supply, $ 365
0-20V/0-30A, 200W max, half rack width.

HP 6024A System Power Supply, $ 325
0-60V/0-10A, 200W max, half rack width.

HP 6031A System Power Supply,  $ 925
0-20VDC, 120A, 1KW max output, GPIB, rackmount.

HP 6032A System Power Supply, $ 935
0-60VDC, 50A, 1000 watt max,  front panel or GPIB operation, rackmount.

HP 6034A System Power Supply, $ 425
0-60VDC, 10A, 200 watt max, GPIB or front panel control.

HP 6038A System Power Supply,  $ 510
0-60V/0-10A, front panel or GPIB operation.

HP 6111A Precision DC Power Supply, 0-20V @ 1A max, four digit plus $ 125
vernier voltage control, metered.

HP 6112A Precision DC Power Supply, 0-40V @ .5A max, four digit plus $ 175
vernier voltage control, metered.

HP 6115A Precision DC Power Supply, 0-50V @ .8A or 50-100V @ .4A, $ 225
four digit plus vernier voltage control, metered.

HP 6116A Precision DC Power Supply, 0-100V @ 200mA max, four digit $ 225
plus vernier voltage control, metered.

HP 6140A Digital Current Source with option J99 (BCD interface), $ 250
0-10mA and 0-100mA ranges, 4 digits resolution, rackmount.

HP 6209B Power Supply, $ 200
0-320 VDC @ 100mA max, metered, nice compact unit.

HP 6253A Dual Power Supply, each side 0-20VDC @3A $ 190

HP 6261B Power Supply, 0-20 Volts @ 50 Amps max. Has option 026 $ 395
(115VAC input). Metered, rackmount.

HP 6264B Power Supply, 0 – 20 VDC @ 20 Amps max. Has options 022 $ 375
(V&I programming adjustments) and 040 (Multiprogrammer interface).
Metered, rackmount.

HP 6266B Power Supply, 0 – 40 VDC @ 5 Amps max, metered, rackmount. $ 185

HP 6267B Power Supply, 0 – 40 VDC @ 10 Amps max, metered, rackmount. $ 295

HP 6271B Power Supply, 0 – 60 VDC @ 3 Amps max, metered, rackmount. $ 200

HP 6291A Power Supply, 0-40 VDC @ 5 A max, compact 1/2 rack width $ 170

HP 6296A Power Supply, 0-60 VDC @ 3 A max, compact 1/2 rack width $ 155

HP 6267B Power Supply, 0 – 40 VDC @ 10 Amps max, metered, rackmount. $ 295

HP 6443B Power Supply, $ 370
0-120VDC @ 2.5A max, metered, rackmount.

HP 6554A Programmable Power Supply, $ 675
0-60VDC @ 9A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6574A Programmable Power Supply,  $ 995
0-60VDC @ 35A max output, 191-250VAC input, GPIB or front panel control.

HP 6624A Quad DC Power Supply, $ 550
Four GPIB programmable 40W outputs, with rack ears.

HP 6625A Dual Precision DC Power Supply, $ 650
Two GPIB programmable 25 or 50W low ripple/noise outputs, with rack ears.

HP 6627A Quad DC Power Supply, $ 575
Four GPIB programmable 0V/2A or 50V/0.8A 40W outputs, with rack ears.

HP 6632A Programmable Power Supply, $ 280
0-20VDC 5A max output,  GPIB or front panel control, with rack ears.

HP 6633A Programmable Power Supply, $310
0-50VDC @ 2A (100W max) output, GPIB or front panel control, with
rack mount ears.

HP 6644A Programmable Power Supply, $ 540
0-60VDC @ 3.5A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6651A Programmable Power Supply, $ 435
0-8VDC @ 50A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6654A Programmable Power Supply, $ 695
0-60VDC @ 9A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6824A Power Supply / Amplifier, $ 225
As a power supply, it generates +50 to -50 volts at 1.0 Amp max. As an amplifier, it offers
20dB gain from DC-10 kHz.

HP E3617A Power Supply, $ 260
0-60V DC @ 1A max, front panel or remote analog programming.

KEPCO ATE100-2.5M DC Power Supply, $ 235
0-100V at 2.5A max, metered, benchtop.

KEPCO ATE150-0.3M DC Power Supply, $ 195
0-150V at 300mA max, metered, benchtop.

KEPCO ATE55-10M DC Power Supply, $ 250
0-55V at 10A max, metered, benchtop

KEPCO BOP1000M Bipolar Operational Power Supply/Amplifier, $ 735
0 to +-1000V, 40mA max output. Later unit with solid state booster stage. Current model,
see specs for the BOP-HV Series here .

KEPCO BOP20-5M Bipolar Operational Power Supply/Amplifier, $ 550
0 to +-20V @ 5A max, analog metering.  With option 4882 GPIB. Current model, see specs
for the Kepco BOP Series here .

KEPCO BOP20-20M Bipolar Operational Power Supply/Amplifier, $ 1,125
0 to +-20V @ 20A max, analog metering. Current model, see specs for the Kepco
BOP Series here .

KEPCO BOP50-4 Bipolar Operational Power Supply/Amplifier, $ 695
0 to +-50V @ 4A max. With option 500B digital programming. See specs for the Kepco
BOP Series here .

KEPCO JQE100-1 DC Power Supply, $ 150
0-100V at 1A max, metered, benchtop.

KEPCO JQE100-2.5M DC Power Supply, $ 225
0-100V @ 2.5A max, metered, benchtop.

KEPCO JQE100-10M DC Power Supply, $ 375
0-100V @ 10A max, metered, rackmount.

KEPCO JQE150-.35M DC Power Supply, $ 210
0-150V @ .35A max, metered, benchtop.

KEPCO MBT25-14MG Power Supply, $ 625
0-25VDC @ 14A max. With option “G”, adds GPIB and RS-232 control. Current model, see
specs and manuals here .

KEPCO PAT 100-0.2 Modular Power Supply, $ 75
0-100VDC @ 200mA max modular linear supply with 1000 Ohms/Volt programming.

KEPCO PRM24-42M Power Supply, 24VDC @ 42A, metered, rackmount $ 295

KEPCO PRR24-42M DC Power Supply, 110VAC in, 0-24V @ 42A max output, $ 295
metered.

KEPCO RAX28-6.2K Switching Power Supply, 115-230VAC in, nominal 28VDC $ 195
(adjustable 19.8-30.8) at 6.2A max output. Brand new in box with
instruction sheet.

KIKUSUI PAB18-1.8A DC Power Supply, 0-18V @ 1.8A max, nice compact $ 75
unit, digital metering, CV/CC operation. Download the manual here..

KIKUSUI PAD160-3.5L Power Supply, 0-160VDC @ 3.5A max, metered, local $ 395
or remote programming, excellent. Download the manual here.

LAMBDA LF-9-04-GPIB Programmable Power Supply,  $ 295
Dual ouput 0 +- 49.95VDC  at 2A max, GPIB, mounted in an LRA-17 rack
unit with digital metering, excellent. See specs (PDF) here.

LAMBDA LK362-FMOV DC Power Supply, 220VAC in, 0-60V @ 25A max output, $ 340
metered.

LAMBDA LLS-3120-GPIB DC Power Supply,  $ 295
0-120V @ .25A max out, digital readouts, with GPIB and serial programming.
Download manuals here .

LAMBDA LMS-9120 DC Power Supply,  $ 225
Compact modular supply, 0-120V at 7A max. Download manual here .

LAMBDA LM-228 DC Power Supply, compact linear supply, 22-32VDC output $ 75
at 2A max, brand new in box with manual.

LAMBDA LQ410 Power Supply, compact 0-10VDC @ 2A max, switchable V/I $ 70
digital readout, w/ feet & tilt bale.

LAMBDA LQD422 Dual Power Supply, nice compact unit, each side is $ 125
0-40VDC @ 1A max, with digital metering.

LAMBDA LT823 Power Supply  $ 510
208VAC 3-phase in, 0-36 VDC @ 80A max out. Metered, CV/CC modes, rackmount.

POWER DESIGNS 2005 Precision Power Source, $ 65
20V/500mA, ultra-stable ovenized reference, 4 digits settable in two ranges.

POWER TEN P63E-15660 DC Power Supply, 440-480VAC input, 0-15VDC at $ 895
660A output (three 220A sections). Digital metering, front panel
or remote analog control. Specs and manual are here.

POWER TEN 3300D-4015 DC Power Supply, 0-40V @ 0-15A max. Single RU $ 395
height, digital displays. Download the manual here

QUALIDYNE QML Switching Power Supply, 300 Watts, both are new unused.
– model QML300-018 is 2 channels, each 17.7VDC at 10A max $ 210
– model QML300-019 is 3 channels, two 12.7VDC at 12A max and $ 210
one 8.7VDC at 4A max.

SORENSEN DCR10-120 Power Supply, $ 450
0-10 VDC at 120A max, metered, V & I limiting.

SORENSEN DCR150-3B Power Supply, 0-150VDC @ 3 Amps max, local or $ 395
remote programming, metered.

SORENSEN DCR600-.75B Power Supply, 0-600VDC @ .75A max, local or $ 340
remote programming, metered.

SORENSEN DCS8-125 Switching DC Power Supply, $ 395
115/230VAC in, 0-8VDC @ 125A max output, digital metering, single rackspace height.

SORENSEN DCS20-50 Switching DC Power Supply, $ 595
115/230VAC in, 0-20VDC @ 50A max output, digital metering, single rackspace height.

SORENSEN DCS33-33E Switching DC Power Supply, $ 575
115/230VAC in, 0-33VDC @ 33A max output, digital metering, single rackspace height.

SORENSEN DCS50-24E Switching DC Power Supply, $ 625
115/230VAC in, 0-50VDC @ 24A max output, digital metering, single rackspace height.

SORENSEN DCS300-3.5 Switching DC Power Supply, $ 625
115/230VAC in, 0-300VDC @ 3.5A max output, digital metering, single rackspace height.

SORENSEN DLM40-15 DC Power Supply, $ 585
115/230VAC in, 0-40VDC @ 15A, 600W max output, digital metering, single rackspace height.
See DLM600 Series specs here .

SORENSEN DLM60-10/M9G/M130 DC Power Supply, $ 675
115/230VAC in, 0-60VDC @ 10A, 600W max output, digital metering, single rackspace height.
With options M9G (GPIB) and M130 (Ethernet LAN/RS-232C). Buy two and get the rackmount kit.
See DLM600 Series specs here .

SORENSEN SRL40-6 Power Supply, 240W, 40V & 6A max  $ 195

SORENSEN SRL40-50 Power Supply, 220VAC input, 0-40VDC @ 50A output, $ 425
metered, rackmount.

SORENSEN XTD120-.5 Power Supply, $ 260
Dual 0-120V DC @ 0.5A max, independent front panel or GPIB programming.

SYSTRON DONNER TL8-3 Triple Power Supply, compact benchtop unit, $ 85
0-8 V @ 3A, 0-32 V @ 1A, 0 – -32 V @ 1A, three meters, 1/2 rack
width.

TECHRON 7521 Power Supply Amplifier,  $ 425
single channel, 250 watts into 4 Ohms, DC-25kHz bandwidth, CV/CC operation.
See op/service manual here.

TECHRON 7540 Power Supply Amplifier, $ 550
two channels, each 265 watts/channel into 4 Ohms (higher in bridged mode),
DC-20kHz. See data sheet here.

TRANSISTOR DEVICES INC (TDI) DLP50-150-3000A Dynaload, $ 625
0-50V, 0-150A, 3000W max electronic load, normal and pulse modes.

TRANSISTOR DEVICES INC (TDI) DLR50-15-150A Dynaload, $ 220
0-50V, 15A, 150W max electronic load.

XANTREX XHR60-18 Switching DC Power Supply, $ 625
85-250VAC 47-63Hz in, 0-60VDC @ 18A max output, digital metering.

AC Power Sources

BEHLMAN KBT-75C-388-450 Programmable AC Power Source,  $ 750
115VAC input, 0-135 or 0-270VAC single phase output, 750VA max, 45-2,000Hz internal
synthesized oscillator, front panel or GPIB control.

BEHLMAN 3-17-A-402 3-Phase AC Power Source  $ 825
115/230VAC input, 0-130VAC 3-Phase output at 150-2000Hz, 510VA max, front
panel voltage metering. Includes OSCP-3-400-E 3-phase 400Hz oscillator plugin.

BEHLMAN 25-B AC Power Source $ 395
115VAC input, 0-130VAC single-phase output at 150Hz-10kHz, 250VA max, front
panel voltage meter. Includes OSC-1 single-freq oscillator plugin,. currently
set to 8kHz (internally trimmable).

CALIFORNIA INSTRUMENTS 251TCA AC Power Source, $ 625
0-135/270 VAC output at 250VA max, includes 851T 400Hz oscillator plugin.

CALIFORNIA INSTRUMENTS 501TC AC Power Source, $ 725
0-135/270 VAC output at 500VA max, includes 855T 400Hz oscillator plugin.

ELGAR 1001A AC Power Source with 400V Oscillator, $1,125
Single Phase output (0-130 or 0-260 VAC ranges), 1000VA max. The 400V Variable
Frequency Oscillator plugin provides stable 45 to 450 Hz output. Download the
op manual here.

ELGAR 121 AC Power Source, 120VAC input, 0-30 or 0-130VAC $ 250
output, 120VA max, no oscillator plugin.

ELGAR 751A AC Power Supply, 750 Watt, 0-280 VAC Single Phase output, $ 750
with “blank panel” plugin.

ELGAR 751SL AC Power Source, 750 Watt Single Phase output in three
ranges (0-65, 0-130, and 0-260 VAC).
– with 400-series signal routing plugin (slave) $ 835

FRANEK L1124 400Hz AC Power Source  $ 525
115VAC input, 0-130 or 0-260 VAC single-phase output, 500VA max, internal
400Hz oscillator is variable from 350-450Hz. Front panel digital metering of all
output parameters. Nice unit. Franek’s website is here .

INDUSTRIAL TEST EQUIPMENT CO. “Powertron” 500S AC Voltage Source $ 695
115VAC input, 500 Watts output, 45Hz-20KHz full-power bandwidth. With XA-1 plugin
(time-delay turnon with level control for external oscillator). With input cable. Current
model, see specs here

High Voltage Power Supplies

BERTAN 2019 HV Power Supply, $ 425
0-6.5kVDC, + and – polarity HV-BNC rear panel outputs, metered, rackmount.

BERTAN 205A-03R HV Power Supply, $ 325
0-3kV @ 10mA max, metered, reversible polarity, front panel or remote analog control.

BERTAN 205A-05R HV Power Supply, $ 350
0-5kV @ 5mA max, metered, reversible polarity, front panel or remote analog control.

BERTAN 205A-10P HV Power Supply, $ 360
0-10kV @ 2.5mA max, metered, positive polarity, front panel or remote analog control.

BERTAN 205B-20R HV Power Supply, $ 450
0-20kV DC @ 1mA max, digital metering, reversible polarity, front panel or remote analog control.

BERTAN 210-03R HV Power Supply, $ 615
0±3kV DC @ 75mA max with reversible polarity output. Current model, see: Bertan 210 Series.

BERTAN 210-10R HV Power Supply, $ 640
0±10kV DC @ 15mA max with reversible polarity output. Current model, see: Bertan 210 Series.

BERTAN 210-50R HV Power Supply, $ 795
0±50kV DC @ 2.5mA max with reversible polarity output. Current model, see: Bertan 210 Series.

BERTAN 225-01R Power Supply, $ 460
0-1kV @ 30mA, reversible polarity, local and remote programming via GPIB. Current model,
see details/specs here.

BERTAN 225-05R Power Supply, $ 550
0-5kV @ 5mA, reversible polarity, local and remote programming via GPIB. Current model,
see details/specs here.

BERTAN 225-20R Power Supply, $ 595
0-20kV @ 1mA, reversible polarity, local and remote programming via GPIB. Current model,
see details/specs here.

FLUKE 410B HV Power Supply, $ 595
0-10kV @ 10mA max, four decades plus vernier adjustment.

FLUKE 415B HV Power Supply, $ 295
0-3.1kV in 1V steps, with 30mA max. current output.

GAMMA HV RESEARCH model RR5-12P/M150 High Voltage Power Supply, $ 450
120VAC in, 0 to +5kVDC @ 30mA max. output, analog metering. See Gamma
RR Series specs: Gamma RR Series

GLASSMAN FC60P2 HV Power Supply, 0-60kV @ 2mA max, single rackspace $ 525
height, digital readouts, local/remote programming, RG8U output.
Current model, see full specs here

HP 6516A DC Power Supply, 0-3000V at 6mA max. Precise 3 digit plus $ 275
vernier voltage setting, metered output.

HP 6525A DC Power Supply, 0-4000V at 50mA max. Precise 3 digit plus $ 350
vernier voltage setting, metered output.

KEITHLEY 247 HV Power Supply, 0-3kV @ 6mA max  $ 325

KEPCO APH 1000M Power Supply,  $ 295
0±1,000VDC at 20mA max, front panel control or rear panel programming. Current model,
see details here .

KEPCO APH 2000M Power Supply,  $ 335
0±2,000VDC at 10mA max, front panel control or rear panel programming. Current model,
see details here .

KEPCO OPS2000B Operational Power Supply, ±2,000V at 10mA max, front $ 325
or rear panel programming terminals.

KEPCO OPS5000 Operational Power Supply, ±5,000V at 5mA max, rear $ 325
panel programming terminals.

SPELLMAN RHR10P10/CR/RVC10/TP HV Power Supply, 0-10kV @ 1mA max, $ 240
metered, nice.

SPELLMAN SL10PN300 HV Power Supply,  $ 725
0±10kVDC at 30mA max, digital metering, front panel control or rear panel programming.
Current model, see details here .

SPELLMAN SL6PN60 HV Power Supply,  $ 625
0±6kVDC at 10mA max, digital metering, front panel control or rear panel programming.
Current model, see details here .

Posted in Test Equipment

AGILENT / HEWLETT PACKARD

HP 10432A 10:1 300MHz Probe, in pouch w/ manual & accessories $ 45

HP 10441A 500MHz 10X Probe, like new in pouch with ground lead, $ 60
grabber, spare tip, and manual.

HP 11600B Transistor Fixture for 8754A S-parameter test set. DC-2GHz. $ 150
Includes all four bases, in storage case. Excellent.

HP 1332A CRT Display, $240
High-resolution display module with options 110 (50 Ohm XY inputs),
210 (50 Ohm Z input), and 315 (installed in HP System II half-rack
cabinet). Nice sharp display.

for HP 16047A Test Fixture, one pair of radial component inserts $ 40

HP 16055A Test Fixture, for general device measurements w/ HP 4140B and $ 125
4141B source/meters. Provides electrostatic and light shielding for
stable pA measurements.

HP 16095A Probe Fixture, use with HP 4192A and other 4-terminal LCR $ 550
and impedance meters for making in-circuit measurements. With all
accessories except BNC adapter. Current product, see specs: here

HP 1630G Logic Analyser, 65 channels, 25MHz state / 100MHz timing $ 265
analysis. Includes three 10271A State probes, one 10272A State/Timing
probes, three 10273A State/Timing probes, two clip sets (16 lines),
and storage pouch. Excellent.

HP 16500A Logic Analyser mainframe, with cpu board, GPIB and serial $ 250
i/o, front & rear floppies, nice color display, with pouch (no
software), very nice.

HP 16520A Digital Pattern Generator plugin, up to 50Mbit/sec data $ 295
rate from a 4k memory, 15 channels (expandable). Includes two
16520-61602 output connectors and one 16520-61601 input. Appears
to be unused.

HP 16521A Digital Pattern Generator Expander plugin, adds 46 channels $ 275
to the HP 16520A. Includes two 16520-61602 output connectors and
one 16520-61601 input. Appears to be unused.

HP 16530A Digitizing Timebase plugin for HP 16500A/B Logic Analysers. $ 250
Use with the 16531A plugin for simultaneous sampling of up to 8
channels at once. Excellent.

HP 16531A Digitizing Oscilloscope plugin for HP 16500A/B Logic $ 250
Analysers, turns it into a full-featured 2-channel DSO with 400MS/
sec sample rate, 100MHz analog and single-shot bandwidth, and 4k
sample memory depth per channel. Excellent.

HP 16532A Digitizing Oscilloscope plugin for HP 16500A/B Logic $ 350
Analysers, turns it into a full-featured 2-channel DSO with 1GSa/
sec sample rate, 250MHz analog and single-shot bandwidth, and
8k sample memory depth per channel. Excellent.

HP 214B High Power Pulse Generator, 0.3V to 100V, selectable polarity,
10Hz to 10MHz rep rate, 25ns to 10ms pulse width.
– with option 001 Counted Burst, $ 395

HP 28615A Fiber-Optic Link card for HP 9000 systems $ 40

HP 3310B Function Generator, $ 125
Versatile 5mHz analog generator with start/stop phase triggered burst.

HP 3314A Function Generator, $ 425
20 MHz, GPIB. Compact and versatile synthesizer and sweeper.

HP 3325B Synthesizer/Function Generator
– with option 001 (High Stability Reference)  $ 410

HP 3326A Two-Channel Synthesizer with opts 001 and 002, $ 975
Two independent 0-13MHz synthesizers with flexible modulation and control features.
Includes options 001 (High Stability Frequency Reference) and 002 (High Voltage
Output) with rackmounts and handles.

HP 3335A Synthesizer/Level Generator, $ 695
200Hz-81MHz w/ 1mHz resolution, 50/75 Ohm outputs to +13dBm @ .01dB resolution.

HP 3336C Synthesizer / Level Generator with opts 004 and 005, $ 455
Precision level control and high spectral purity from 10Hz – 21MHz, front
panel or GPIB control. Option 004 adds an ovenized frequency reference and
Option 005 reduces attenuator step inaccuracy by half and improves flatness
to 0.07dB.

HP 3435A 3-1/2 digit Multimeter with option 002 benchtop case $ 50

HP 3456A Digital Voltmeter, 6-1/2 digits, GPIB i/o, with rackmount $ 285
ears and op/programming instructions.

HP 3457A Multimeter, 7-1/2 digits, GPIB or front panel operation.
– standard unit $ 385
– with 44491A multiplexer $475

HP 3465A Multimeter, 4.5 digits, in benchtop rack & stack case $ 65

HP 3467A 4-channel Logging Multimeter with builtin printer and $ 110
extended math functions. Cal looks good.

HP 3478A Multimeter, nice compact 30,000-count 5-1/2 digits, True RMS $ 185
AC, GPIB, excellent. With bench feet or rack ears.

HP 3488A Switch/Control Unit, nice clean unit with rack ears. See $ 75
overview with pics at: HP 3488A
Plugin cards for the HP 3488A Switch/Control Unit (all include terminal block):
HP 44470A 10-ch. Relay Multiplexer with terminal block (3488A) $ 60
HP 44471A 10-ch. Relay Multiplexer with terminal block (3488A) $ 65
HP 44472A Dual 4-ch. VHF Switch (DC-300MHz, 50 Ohms) $ 75
HP 44473A 4×4 Matrix Switch with connector block (3488A) $ 75
HP 44474A Digital I/O with terminal block (3488A) $ 60

HP 3497A Data Acquisition/Control Unit
– with opt. 001 5.5 digit DVM & current source, $ 295
– with option 232 (RS-232 interface replaces HPIB) $ 265
Plugin cards and options for the 3497A (all include terminal block):
HP 44422A 20 channel Relay Mux w/thermocouple compensation $ 55
HP 44425A 16-Channel Isolated Digital Input module $ 50
HP 44426A Counter $ 75
HP 44428A 16-Channel Actuator Output $ 50
HP 44429A Dual Voltage D/A $ 75
HP 44430A Dual Current D/A $ 75
HP 44431A 8-ch. AC Actuator $ 55

HP 3498A Extender, $ 220
for 3497 Data Acq. Unit, with rack ears

HP 353A Patch Panel, a great general-purpose tool with an excellent $ 60
set of line-level transformers inside.

HP 35650A Signal Analyzer Mainframe, 8 slots $ 295

HP 35650B Signal Analyzer Mainframe, 4 slots $ 275

HP 35655A Input Module, 8 channels simultaneously sampled, 12.5kHz $ 295
max bandwidth. Includes BNC breakout box and cable.

HP 3586C Selective Level Meter, $ 450
High-accuracy level measurements from 50Hz to 32.5MHz with .1 Hz and .01 dB resolution,
under front panel or HPIB control. Excellent later unit with rack ears and handles.

HP 37203A HPIB Extender with Option 001 Fiberoptic Interface $ 100

HP 37204A Multi-point HPIB Extender
– with Option 001 (fiberoptic port, SMA connectors) $ 100

HP 3852A Data Acquisition/Control Unit
– standard unit $ 265
– with Option 002 (1MB Extended Memory) $ 275
Plugin cards for the 3852A/3853A (all include connector block):
HP 44701A 5-1/2 digit DVM plugin $ 195
HP 44702A 13-bit High-Speed Voltmeter plugin w/ Enhanced firmware $ 150
HP 44702B 13-bit High-Speed Voltmeter plugin $ 150
HP 44705A 20-channel Relay Multiplexer $ 65
HP 44706A 60-channel Relay Multiplexer $ 85
HP 44708A 20-Channel Relay Mux w/ T’couple Compensation $ 75
HP 44708F 20-Channel Relay Mux w/ T’couple Compensation $ 95
HP 44710A 20-Channel FET Mux w/ T’couple Compensation $ 85
HP 44713A 24-Channel High Speed FET Mux w/ T-couple Comp. $ 95
HP 44713B 24-Channel High Speed FET Mux w/ option 3 Noise Filter $ 110
HP 44715A 5-Channel Counter/Totalizer $ 95
HP 44718A 350 Ohm Strain Gage Relay Mux $ 90
HP 44721A 16-Channel Digital Input (Brand New) $ 110
HP 44723A 32-Channel Digital Sense/Control $ 80
HP 44725A 16-Channel General Purpose Switch $ 65
HP 44726A 2-Channel Arbitrary Waveform DAC $ 85
HP 44727A 4-Ch. Voltage/Current DAC $ 85
HP 44727B 4-Channel Voltage/Current DAC $ 85
HP 44728A 8-Channel Relay Actuator (switches AC or DC) $ 75
HP 44736A Breadboard plugin, roll your own $ 65

HP 400E AC Voltmeter (10MHz), BNC input, nice shape $ 75

HP 4141B DC Source/Monitor, four channel GPIB programmable DC $ 725
voltage/current source (±100uV to ±100V, 50fA to ±100mA) & two
channel voltage monitoring with timing control. Excellent.

HP 4140B pA Meter/DC Voltage Source, $ 850
Precision picoammeter and two programmable dc voltage sources, one of which
sweeps/ramps. GPIB or front panel control.

HP 4192A Impedance Analyzer, $2,200
Impedance and Gain-phase from 5Hz-13Mhz. Spot or swept measurements, front
panel or GPIB control.

HP 4195A Network / Spectrum Analyzer, $ 3,300
10Hz-500Mhz spectrum and vector network measurements. Color display, front
panel or GPIB control.  With all cables and operating manual.

HP 4261A LCR Meter,  $ 300
nice compact 1kHz/120Hz LCR meter.

HP 4274A Multifrequency LCR Meter (100Hz – 100kHz). High speed and
high accuracy measurements.
– with option 101 (HPIB) and 001 (+-40V DC Bias) $ 725

HP 4275A Multifrequency LCR Meter (10kHz – 10MHz). High speed and
high accuracy measurements.
– with option 002 (+-100V DC Bias) and 101 (HPIB) $ 795

HP 4276A LCZ Meter, $ 595
100Hz-20kHz (800 freq’s), 4-terminal measurements, pushbutton open/zero compensation,
GPIB interface, etc. A variable-frequency Z meter with unique capabilities.

HP 4277A LCZ Meter, 701 frequencies, 10kHz-1MHz, .1% basic accuracy, $ 875
measures C-D, Q, ESR, G, L, D, 4.5 digit displays. In excellent
condition with feet & tilt bales.

HP 4800A Vector Impedance Meter, direct-reading 1 Ohm-10MegOhm and $ 425
+- 90 degrees phase from 5Hz to 500kHz. In excellent condition and
good cal, with operating instructions.

HP 4815A RF Vector Impedance Meter, direct reading of impedance and
phase from 1 ohm to 100k Ohms overs the 500KHz-108MHz frequency
range.
– one mainframe only (tested good) $ 325

HP 5087A Distribution Amplifier,  $ 375
Configured as 1 in x 4 out at 1MHz, and 1 in x 8 out at 5MHz (12 outputs total).

HP 5316A Universal Counter, 2-channels, 100MHz, 7 digits/sec. counting,
excellent low-freq. resolution, in desktop case with GPIB.
– w/ options 003 (1GHz C-channel) and 004 (Ovenized time base) $ 220

HP 5334B Universal Counter, 9 digits/second resolution, GPIB, with $ 275
option 010 (ovenized reference) and 030 (1.3GHz C channel). Has
one minor front panel blemish but otherwise very good.

HP 5335A Universal Counter/Timer. 200MHz, 9 digit resolution, math functions,
direct phase measurement (to 1MHz), etc.
– with option 020 (DVM) and 040 (expanded HPIB control), $ 375
– with option 010 (ovenized TCXO), 030 (1.3GHz C-channel), and 040 (expanded
HPIB control), $ 475

HP 5353A C Channel plugin for 5345A counter, same 500MHz BW as the $ 85
the mainframe.

HP 54112D Color Digital Scope, $ 575
Four channels with 400MSa/sec 100MHz BW, 64K memory depth each. Logic triggering
functions, GPIB.

HP 54201A Digital Scope. 300MHz repetitive, 50MHz single shot, two $ 350
channels, one-touch autoscaling, waveform math, direct plotting to
HP plotters. With manual and pouch.

HP 54510A Digital Scope. 2 ch. simultaneous 1 GSa/s sampling, 250MHz $ 460
bandwidth, 20 pS time resolution. With pouch.

HP 54510B Digital Scope, 2 ch. simultaneous 1 GSa/s sampling, 300MHz $ 495
bandwidth, 1mV to 5V/div sensitivity. New battery.

HP 54542A Digital Scope, $625
500MHz BW, 2GSa/sec simultaneous sampling on all four channels, HPIB
RS-232 I/O, with pouch.

AGILENT 54600B 100MHz Digital Scope, $ 330
Two channels, 20MS/s 100MHz BW, with N54657A Measurement/Storage module
(HPIB interface).

HP 59401A GPIB Bus System Analyzer, exercise and troubleshoot your $ 100
bus.

HP 59501B Isolated DAC Power Supply Programmer, $60
Allows GPIB remote programming of many HP power supplies.

HP 59510A Relay Accessory, for remote-controlled relay switching $ 175
of DC power supplies or emergency fault shutdown.

HP 6002A DC Power Supply with option 001 GPIB interface, $ 375
0-50V @ 10A, 200 watts max. CV/CC, metered.

HP 6023A System Power Supply, $ 365
0-20V/0-30A, 200W max, half rack width.

HP 6024A System Power Supply, $ 325
0-60V/0-10A, 200W max, half rack width.

HP 6031A System Power Supply,  $ 925
0-20VDC, 120A, 1KW max output, GPIB, rackmount.

HP 6032A System Power Supply, $ 935
0-60VDC, 50A, 1000 watt max,  front panel or GPIB operation, rackmount.

HP 6034A System Power Supply, $ 425
0-60VDC, 10A, 200 watt max, GPIB or front panel control.

HP 6038A System Power Supply,  $ 510
0-60V/0-10A, front panel or GPIB operation.

HP 6111A Precision DC Power Supply, 0-20V @ 1A max, four digit plus $ 150
vernier voltage control, metered.

HP 6112A Precision DC Power Supply, 0-40V @ .5A max, four digit plus $ 175
vernier voltage control, metered.

HP 6115A Precision DC Power Supply, 0-50V @ .8A or 50-100V @ .4A, $ 225
four digit plus vernier voltage control, metered.

HP 6116A Precision DC Power Supply, 0-100V @ 200mA max, four digit $ 225
plus vernier voltage control, metered.

HP 6140A Digital Current Source with option J99 (BCD interface), $ 250
0-10mA and 0-100mA ranges, 4 digits resolution, rackmount.
Includes HP 59301A Ascii to Parallel Converter.

HP 6209B Power Supply, $ 200
0-320 VDC @ 100mA max, metered, nice compact unit.

HP 6253A Dual Power Supply, each side 0-20VDC @ 3A $ 190

HP 6261B Power Supply, 0-20 Volts @ 50 Amps max. Has option 026 $ 395
(115VAC input). Metered, rackmount.

HP 6264B Power Supply, 0 – 20 VDC @ 20 Amps max. Has options 022 $ 375
(V&I programming adjustments) and 040 (Multiprogrammer interface).
Metered, rackmount.

HP 6266B Power Supply, 0 – 40 VDC @ 5 Amps max, metered, rackmount. $ 195

HP 6267B Power Supply, 0 – 40 VDC @ 10 Amps max, metered, rackmount. $ 295

HP 6271B Power Supply, 0 – 60 VDC @ 3 Amps max, metered, rackmount. $ 200

HP 6291A Power Supply, 0-40 VDC @ 5 A max, compact 1/2 rack width $ 155

HP 6296A Power Supply, 0-60 VDC @ 3 A max, compact 1/2 rack width $ 155

HP 6443B Power Supply, $ 370
0-120VDC @ 2.5A max, metered, rackmount.

HP 6516A DC Power Supply, 0-3000V at 6mA max. Precise 3 digit plus $ 295
vernier voltage setting, metered output.

HP 6525A DC Power Supply, 0-4000V at 50mA max. Precise 3 digit plus $ 350
vernier voltage setting, metered output.

HP 6554A Programmable Power Supply, $ 675
0-60VDC @ 9A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6574A Programmable Power Supply,  $ 995
0-60VDC @ 35A max output, 191-250VAC input, GPIB or front panel control.

HP 6624A Quad DC Power Supply, $ 550
Four GPIB programmable 40W outputs, with rack ears.

HP 6625A Dual Precision DC Power Supply, $ 625
Two GPIB programmable 25 or 50W low ripple/noise outputs, with rack ears.

HP 6627A Quad DC Power Supply, $ 575
Four GPIB programmable 0V/2A or 50V/0.8A 40W outputs, with rack ears.

HP 6632A Programmable Power Supply, $ 280
0-20VDC 5A max output,  GPIB or front panel control, with rack ears.

HP 6633A Programmable Power Supply, $310
0-50VDC @ 2A (100W max) output, GPIB or front panel control, with
rack mount ears.

HP 6644A Programmable Power Supply, $ 540
0-60VDC @ 3.5A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6651A Programmable Power Supply, $ 435
0-8VDC @ 50A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6654A Programmable Power Supply, $ 695
0-60VDC @ 9A max output, GPIB or front panel control. Current model, see complete
specs and download manuals here

HP 6824A Power Supply / Amplifier, $ 225
As a power supply, it generates +50 to -50 volts at 1.0 Amp max. As an amplifier, it offers
20dB gain from DC-10 kHz.

HP 7041A XY Recorder, high-speed plotter with options 005 and 011 $ 295
(500mV/in input ranges), 038 (control panel) and 040 (rear
connector for external control of most functions), includes the
plug for the opt 040 connector.

HP 7090A Measurement Plotting System, $495
3 channels, floating inputs, 12-bit resolution, GPIB, with carousel.

HP 70902A IF Section, 10 Hz-300 kHz resolution bandwidths, HP 70000 $ 595
series systems. With connecting cables.

HP 7470A Plotter
– with RS-232 interface $ 95

HP 7475A plotter
– with RS-232 interface $ 95
– with option 002 (GPIB interface) $ 150

HP 8112A Pulse Generator, $395
50MHz rep rate, 5 ns transitions, 32V output, front panel or GPIB programming.

HP 8116A Pulse/Function Generator
1mHz-50MHz, 32Vpp output, program via front panel or GPIB.
– with option 001 burst and log sweep, $ 495

HP 8160A Programmable Pulse Generator, $2,050
With option 020 second output channel.

HP 82937A HPIB Interfacefor HP 85 computers $ 35

HP 8350B Sweep Generator mainframe, versatile sweep, mod, and CW $ 425
control for all HP 83500 series plug-ins. Front panel and GPIB
control.

HP 83540A RF Plugin for 8350B sweeper, 2.0-8.4 GHz, >+16 dBm output, $ 450
excellent.

HP 8447F Amplifier, $ 335
Two channels, 50 Ohms in and out, one 26dB gain, one 22dB gain.

HP 8559A Spectrum Analyzer in 853A Display,  $1,100
10MHz to 21GHz in 7 spans, 1kHz-3MHz RBW’s, -111 to +30 dBm, simple operation,
digital display with storage and plotter output. With front cover.

HP 86241A RF Plugin, 3.2-6.5GHz, in nice shape $ 270

HP 86242D RF Plugin, 5.9-9.0GHz, 10dBm output $ 295

HP 86602B 1-1300MHz RF Section with opt. 002 (adds phase modulation) $ 250

HP 8761A 18 GHz SPDT Switch (SPDT) with opt. 555 SMA(f) connectors $ 50

HP 88396 SCSI to Parallel Interface with cable, powers up but unable $ 23
to test.

HP 89100A Temperature Controller, accessory used with the HP 8450A $ 150
Spectrophotometer.

HP 908A 50 Ohm, 2 Watt Termination, DC – 4Ghz, with data. $ 50

HP 9121D Dual Disc Drive, used by many HP computers & analyzers $ 110

HP 9413A VHF Switch with eight 94130B 1×8 500MHz VHF Switch modules $ 150
installed.

HP 98032A 16 Bit IO Interface $ 50

HP 98034A HPIB Interface $ 50

HP 98036A RS232C Interface $ 65

HP 9836C Color Monitor only. $ 150

HP 9845B/C accessories:
09845-66526 128 kB RAM memory card $ 40
09845-69590 512 kB RAM memory card $ 95
Structured Software Systems Mass Storage ROM, allows use of 912x $ 150
and 913x disk drives with the 9845 via GPIB.
Structured Software Systems Programmer’s Tool Kit ROM adds many $ 95
essential language extensions for programming and maintenence.

HP 98625B Disc Interface plugin $ 50

HP 9878A I/O Expander for HP 9800-series computers $ 60

HP 10833B 2-meter shielded GPIB cables $ 22

HP 92220R 1/2 meter shielded GPIB cable w/ one end right angle $ 20

HP 44462A 8-channel Mux, 2-channel Actuator & 44463A connector block, $ 45
plugin for HP 3421A.

HP E1301A (75000 Series B) 7-slot VXI Mainframe with front panel $ 195
keyboard & display, GPIB & RS-232 interfaces, with rack ears and
handles, excellent. Drivers from Agilent:HP 75000 series drivers

HP E1406B VXI System Command Module with GPIB, serial, C-size frames $ 250

HP E1411B C-Series VXI Multimeter. 5-1/2 digits, dual A/D’s, $ 295
balanced diff inputs. Current product: see complete specs here.

HP E1427A C-Series VXI Digitizer, 2 GSa/Sec $ 750

HP E1445A C-Series VXI Arbitrary Function Generator, 40 MSa/sec, $ 675
13-bit resolution, 256K sample memory, sequencer, sweep, 20 VPP
output.

HP E1476A 64-Channel 3-Wire TC Mux, card edge connector (terminal $ 50
block) only.

HP E1490B Breadboard VXI Module $ 75

HP E3617A Power Supply, $ 260
0-60V DC @ 1A max, front panel or remote analog programming.

HP E4208A VXI SCSI Disk Module, two SCSI-II ports and one HD 3.5″ $ 170
floppy drive.

HP X375A Variable Attenuator $ 50

Posted in Test Equipment

OTHER Mfr’s (A – J)

ADRET 3300A Synthesizer, 300Hz-60MHz, 1Hz resolution, high stability $ 185
ovenized reference, 10dB/step attenuator, internal modulation generator
(AM/FM), excellent. (worked fine for me down to 5 Hz…)

AVCOM PSA-39A Portable Spectrum Analyzer,  $ 725
950-2050 MHz, +15dBm max, 1-100MHz/div span, digital frequency readout.
Battery doesn’t hold a charge, but otherwise excellent. AVCOM’s website is here

BALDOR 1/6 HP 1725 RPM 115/230 VAC Single Phase Open Frame Motor, $ 65
BRAND NEW. Current model, see specs at: Baldor specs

BK PRECISION 3011B Function Generator, 0.2Hz – 2MHz, nice basic $ 80
generator with digital freq. control, in very nice shape.

BLUE-M CO8A-3-10 Oven,  $ 165
50C-260C temps, 8″x8″x8″ internal, benchtop, nice.

BMI 4800 Powerscope Graphic Environment Monitor, $ 375
Self-contained 4 channel power line disturbance analyzer & 8 channel environmental
monitor. Graphs sags, surges, impulses, waveshape faults, voltage line frequency
errors and high frequency noise. With probes and soft travel case. Order a power
signatures handbook here

BRUEL & KJAER 2033 High Resolution Signal Analyser,  $ 595
400-line FFT’s, DC-10Hz to DC-20kHz, 10kSample input memory, pushbutton
10X zoom, scan analysis moves the 1024-point window through 10240-point input
buffer, external tracking, IEEE-488 I/O, big 11-in. crt, autoranging input has
B&K mic preamp and direct line level input.

BRUEL & KJAER 2313 Graphics Recorder with BZ 7006 Application Pack $ 235
plugin for B&K 2032/2034 Spectrum Analysers and 7400 Digital
Cassette Recorder. Prints screen dumps on A4-width paper. RS-232
and IEEE-488 interfaces.

CAMBRIDGE TECHNOLOGY 520 LC Meter/Comparator,  $ 170
Aauto-ranging, 120Hz &1kHz frequencies, full-scale ranges 200pf-2000mfd and
200uH-2000H, adjustable 0-10VDC bias, limits for hi, lo, and D. In excellent
shape and good cal.

CLAROSTAT 240C (240-C) Power Resistor Decade Box, $ 350
1 Ohm-1 MegOhm in six decades.

DAYTRONIC 9005 Mainframe, $ 175
Has one 9163 Analog Input and one 9259 Peak-Track-Hold module.

DYNATECH Remote Controller, two-bus switcher, RS-232 inputs, manual $ 50

EG&G Ground Motion Detector,  $ 240
No model number, uses Endevco 2262-25 accellerometers on an Endevco 2950 Traxial
Mounting Block, with electronics, air pressure valves, in a beautiful machined aluminum
case. Buy two and get 1/2 a moulded transit case free.

EG&G 113 Pre-Amp, $ 295
100MegOhm single-ended or differential input, unity to 10,000x gain. DC-1kHz HP &
3Hz-300kHz LP filters. Nice compact unit with feet & tilt bale. AC only (no batteries).

EG&G / PAR 5104 Lockin Amplifier,  $ 525
5Hz – 20kHz, 100uV-3V full-scale input ranges, auto-tracking, digital readouts,
GPIB i/o. With op/service manual.

EG&G/PRINCETON APPLIED RESEARCH 5209 Lockin Amplifier,  $ 725
Voltage and current mode inputs, 0.5Hz-120kHz, 10nV-3V full-scale ranges
(with expand), single-ended of diff input, RS-232 and GPIB
i/o, with op/programming manual. Current Signal Recovery model,
see specs here.

ESI DC40 Dekabox Capacitor,  $ 195
0 to 1.111uF in 1nF steps, 1% accuracy, 15pF residual, 500VDC max voltage.

FASCO 1/20 HP 1050 RPM 115VAC 60Hz Single Phase Motor, BRAND NEW $ 30

GIGATRONICS 905 Signal Source,  $1,050
Indirect synthesis signal generator covering 50MHz – 18GHz, control via front panel
or GPIB.  Has options 03 (1kHz resolution), 06 (High Stability Time Base), and 10
(+10 to -99dBm output). See 900-series specs here.

ICS 4887 IEEE-488 Bus Extender, GPIB to optical or coax converter $ 65

IFI (Instruments for Industry) EFS-5 Isotropic Field Strength Meter, $ 120
battery powered, selectable sensitivity, with two antenna probes.

IFI (Instruments for Industry) M1700 Linear Wideband Amplifier, $ 895
Two channels, 1MHz to 30MHz, 280 watts. CH 2 has slightly higher quiescent noise than CH 1,
but they both work fine.

IOTECH Digital488HS/32 GPIB to 32-Bit Digital I/O Interface. High $ 135
speed (1MB/sec) transfers to/from GPIB to TTL & HTCMOS w/ status
and control lines. Download the manual here: 488HS/32 manual

ITHACO Dynatrac 393/03 Lock-in Analyzer,  $ 295
reference oscillator 1Hz-100Hz, with opt. 03 rear-panel Phase output (10mV/deg).

ITHACO 3961 Two-Phase Lockin Amplifier,  $ 750
10Hz-100kHz in four ranges,  auto-ranging inputs, auto-tracking filter (LP, HP, BP),
with digital displays, GPIB and RS-232 remote control, excellent.

ITHACO 4213 Electronic Filter,  $ 250
1Hz-100kHz Hipass, 1Hz-1 MHz Lopass configurable as bandpass (unity gain) or band
reject. Has option 02 Amplifier (0-40dB gain). Price is for two 4213 filters on a
common rackmount. Download the manual here

Posted in Test Equipment

OTHER Mfr’s (K – Z)

KINETIC SYSTEMS VCDS-AA11 VME to VXI Adapter, adapts B size VME $ 175
modules to C-size VXI. Brand new. Current model, see details and
specs here

LEADER 5870 Vector/Waveform Monitor, two-channel NTSC Vectorscope $ 200
with digital SCH phase readout, excellent.

MINI-CIRCUITS ZSC-2-1 (15542) 50 Ohm Power Splitters/Combiner, .1MHz $ 23
to 400MHz, excellent. See specs at: ZSC-2-1 Specs

NORTH ATLANTIC 213C Phase Angle Voltmeter, $ 450
Measures magnitude and phase angle of complex ac signals with respect to a reference voltage.

OMEGA CL24 Calibrator/Thermometer, handheld unit for calibrating K, $ 250
J, T, and E thermocouples. In travel case with leads and adapters.
Current unit, see specs, download manual here

ORTEC BROOKDEAL 9452 Precision AC Amplifier, 100 MegOhm input, $ 235
builtin switchable hipass and lopass filters, unity to 100dB gain,
metered output.

PACIFIC MEASUREMENTS 1045 RF Power Meter, 4 selectable inputs, 1MHz- $ 195
26.5GHZ, GPIB, 0.1uW – 10W ranges. Excellent but without detectors.

PALO ALTO RESEARCH Model 200 Two-Phase Lock-In Amplifier, $ 975
Two input channels, 0.5Hz – 100kHz frequency range, external or internal synthesized oscillator
reference, numeric and bar graph displays, front panel or remote control via GPIB or RS-232.

PHYSIK INSTRUMENTE E-870.00 Wideband Power Amplifier for piezo $195
actuator, with two E-102 power supplies, all in a modular case. In
excellent condition. See Physik’s website here

PRECISION FILTERS INC. System 616 Programmable Multi-Channel Filter $ 450
system, local and GPIB control. Has twelve channels of 616-02-LP1
10Hz-130kHz 80dB/octave low pass filter cards installed, xlnt.

PROGRAMMED TEST SOURCES PTS250 Frequency Synthesizer, 1 – 250 MHz.
Current model, see specs here.
– model MJO1GEY has options M (manual & remote control, front panel $ 460
output), J (Direct Digital Synthesis with 1Hz resolution), O (OXCO
timebase 3x10E-9/day), 1 (120VAC 50-400Hz operation), G (GPIB remote
control), E (three extra 10MHz outputs on rear panel, Y (external
phase control for multiple units).
– model M7O1G has options M (manual & remote control, front panel $ 450
output), 7 (0.1Hz resolution), O (OXCO timebase 3x10E-9/day),
1 (120VAC 50-400Hz operation), G (GPIB remote control).

SYSTRON DONNER M107 Precision DC Voltage Source, $ 525
1µV to 1kV output with 6-digit resolution and 0.002% accuracy in all ranges,
50 mA max. current, polarity switch, all under GPIB or front panel control.
With op/service manual (pdf).

SYSTRON DONNER 6100 Counter Timer (200 MHz) w/ DVM option, 10-digit $ 175
display, and GPIB. Pretty much the same features set as HP 5335A.

TECH SPRAY Inc. #1944 UV Curing System, with UV wand, builtin $ 195
timer, less than 80 hours of use. Same as Electro-Lite ELC600.

TECHRON 7521 Power Supply Amplifier,  $ 425
single channel, 250 watts into 4 Ohms, DC-25kHz bandwidth, CV/CC operation.
See op/service manual here.

TECHRON 7540 Power Supply Amplifier, $ 550
two channels, each 265 watts/channel into 4 Ohms (higher in bridged mode),
DC-20kHz. See data sheet here.

TEGAM 2350 Dual Channel High Voltage Precision Power Amplifier, $1,850
two channels, each X50 gain, DC-2MHz, 400Vp-p max output. Includes two
output cables. Current model: see specs and download manuals here.

TEGAM PRT-10C Programmable RatioTran, high-linearity (±2ppm) ratio $ 350
transformer with six digits resolution under GPIB or BCD control.
With programming instructions sheet. (The PRT-10 was also made by
Eaton and Gertsch). See specs here

TINSLEY 5812-DB Coil Turns Tester with 5812-G Toroid Platform and $ 255
connecting cable. 0-100k turns in 4 ranges, zero set and standard
adjust, excellent. Their homepage is: Tinsley

TRANSISTOR DEVICES INC (TDI) DLR 50-15-150A Dynaload,  $ 220
0-50V, 15A, 150W max.

VALHALLA 2000 Autoranging Watt-Ammeter, True RMS line monitor/power $ 275
meter with digital readouts. 0.001 – 20 amps, 2 kW max.

VALHALLA 4150ATC Micro-Ohmmeter, $675
4-1/2 digit display, 20milliohm to 2Kohms full-scale ranges, 1 micro-ohm resolution on
lowest range. 4-wire Kelvin connection, selectable temperature compensation input.

VALHALLA 4300ATC Micro-Ohmmeter,  $ 395
4-1/2 digit display, 2 milliOhms to 20KOhms full-scale ranges, .1 micro-ohm resolution
on lowest range. 4-wire Kelvin connection, selectable temperature compensation input.

VISHAY 2000 A to D Converter, 16 channels, 14-bit, 50kSa/sec max $ 175
sample rate, GPIB control, nice rackmount unit. Current model,
see specs here

WEINSCHEL 1515 2-way Broadband Resistive Power Divider, DC-18GHz, $ 95
SMA(f) connectors.

W-H ASSOC. D-102H High Voltage Divider, 5KV max input, 500:1 and $ 55
5K:1 outputs, metered.

Posted in Test Equipment

TEKTRONIX

Jump to:
TEK Portable Scopes
TEK Lab Scopes

TEK TM500/TM5000

TEKTRONIX 013-0278-00 Video Display Clamp for Tek TDS-series scopes.  $ 60
Brand New in sealed bag with manual.

TEKTRONIX 1101 Probe Power Supply,  $ 95
Provides power for up to four Tek active probes.

TEKTRONIX 1101A Probe Power Supply,  $ 125
Provides power for two Tek active probes.

TEKTRONIX 184 Time Mark Generator, nice standalone unit $ 85

TEKTRONIX 575 Curve Tracer op/service manual, new binding $ 30

TEKTRONIX 620 Monitor with Option 01 8×10 Internal Graticule
– two 620 monitors in a common rackmount package, $ 375

TEKTRONIX 634 Monitor, $ 85
Raster scan monitor with composite video input

TEKTRONIX 92HS8E High Speed Acquisition Expander for DAS9200 system,  $ 225
with eight P6464 Pattern Generator probes.

TEKTRONIX DSA-601A Signal Analyzer, 1GSa/Sec max sample rate, 500 $ 550
MHz bandwidth, two simultaneous-sampled channels, FFT, GPIB, 3.5″
floppy storage, color display.

TEKTRONIX DSA-602A Signal Analyzer, 2GSa/Sec max sample rate, 1 GHZ $ 875
bandwidth, up to 4 simultaneous-sampled channels, FFT, GPIB, 3.5″
floppy storage, color display, with option 1R rackmount.

TEKTRONIX P6022 Current Probe Package, $ 360
Includes P6022 current probe, ground lead, 011-0106-00 Passive Termination, and Type 134
Current Probe Amplifier with power supply, all in the original Tek storage case.

TEKTRONIX P6046 Differential Probe, active FET inputs, 100MHz $ 150
bandwidth, includes amplifier, power supply, and ground lead.

TEKTRONIX P6407 Word Recognizer Probe with manual $ 75

TEKTRONIX P6464 Pattern Generator Probes, Brand New in the box $ 50

TEKTRONIX P6487 High Speed Data Acq. Probe with leadset $ 85

TEKTRONIX S-2 Sampling Head, 75pS risetime $ 120

TEKTRONIX S-5 Sampling Head, 350MHz bandwidth, 1MegOhm input $ 65

TEKTRONIX VX1410 IntelliFrame, $ 450
13-slot C-cize VXI mainframe with Option 1M (enhanced monitor with alphanumeric
display).

TEKTRONIX Portable Scopes

TEKTRONIX 2235A 100MHz dual trace analog scope  $ 315

TEKTRONIX 2246 100MHz Oscilloscope, $ 275
4 channel portable analog scope with versatile cursors, integrated voltmeter.
With pouch.

TEKTRONIX 2246A 100MHz 4 channel analog scope. Tracking cursors, $ 310
integrated voltmeter. With option 1R (rackmount).

TEKTRONIX 2247A 100MHz Oscilloscope, $ 375
Four channel portable scope w/ built-in voltmeter, counter & tracking cursors.

TEKTRONIX 2432A Digital Scope, 2 channel portable, 250MSa/300MHz, $ 490
GPIB, with pouch.

TEKTRONIX 2445A Portable Scope, $ 365
150 MHz 4-channel analog scope with cursors & readout, with pouch.

TEKTRONIX 2445B Portable Scope, $ 395
150 MHz 4-channel analog scope with option 10 (GPIB) and pouch.

TEKTRONIX TAS465 portable Scope, $ 285
2-channel 100MHz, lots of handy features.

TEKTRONIX TDS320 Digital Scope, 2 Channel 100MHz 500MSa/sec
– standard unit, $ 340
– with option 14 I/O Interfaces (GPIB, RS-232, VGA, printer)), $ 375

TEKTRONIX TDS340A Digital Scope, $ 435
2 Channel 100MHz 500MSa/s, with FFT,  roll mode,  and option 14 I/O Interfaces:
GPIB, RS-232, Centronics interfaces, and VGA Video output.

TEKTRONIX TDS380 Digital Scope, $ 550
2 Channel 400MHz 2GSa/sec, with FFT and option 14 I/O Interfaces: GPIB, RS-232, VGA, and
Centronics printer.

TEKTRONIX TDS410A Digital Scope, $ 410
Two Channel 200MHz 100MSa/sec with GPIB and options 13 (RS-232 and Centronics Printer
interfaces) and 1F (3.5″ Floppy drive).

TEKTRONIX TDS420 Digital Scope, $ 425
4 Channel 150MHz 100MSa/sec, with GPIB.

TEKTRONIX TDS420A Digital Scope, 4 Channel 200MHz 100MSa/sec with GPIB.
– standard unit, $ 440
– with options  13 (RS-232/Centronics) and 1F (Floppy Drive/File System), $ 460
– with options 05 (video trigger), 13 (I/O), 1M (120k Pt. Data Records), 1F (Floppy Drive),
and 2F (Advanced DSP Math),  $ 495

TEKTRONIX TDS460 Digital Scope, $ 475
4 Channel 350MHz 100MSa/sec, with GPIB and vga output.

TEKTRONIX TDS540C Digital Scope with Instaview, $695
Four channel 500MHz BW, 1GSa/Sec sampling, color display. Has options 13
(printer ports),  1F (Floppy drive) and 1R (rackmount).

TEKTRONIX TDS620 Digital Scope, $ 495
Two channels, 500MHz BW, 2GSa/sec sampling, GPIB interface.

TEKTRONIX TDS640 Digital Scope. Four channels, 500MHz BW, 2GSa/sec
sampling.
– standard unit, $ 695
– with TD100 Data Manager, $895

TEKTRONIX TDS744A Color Digital Scope with Instaview, $ 825
Four channel 500MHz BW, 2GSa/Sec sampling,  color. Has options 13
(printer ports),  1F (Floppy drive), 1M (500,000 pts record length), 2F
(Advanced Math functions), and 1R (rackmount).

TEK TDS200 Series Digital Scope manuals set, $ 35
Brand new in the box. Includes: User Manual, Programmer Manual, and Extension
Modules Manuals.

.

TEKTRONIX Lab Scopes
(inquire about system discounts on 7000-series mainframes with plugins)

TEKTRONIX 11402 1GHz Digital Oscilloscope mainframe, $ 440
Up to 8 channels with 10k point data records, plugin flexibility, GPIB and serial I/O.

TEKTRONIX 11A32 400MHz 2 Channel Amplifier, selectable 50/1Meg Ohm $ 140
inputs, 1 mV to 10V/div sensitivity.

TEKTRONIX 11A32 400MHz 2 Channel Amplifier, has a minor front panel $ 75
blemish but works fine.

TEKTRONIX 11A33 Differential Comparator for 11000-series scopes $ 200

TEKTRONIX 11A34 300MHz 4 Channel Amplifier, selectable 50/1Meg Ohm $ 195
inputs, 1 mV to 10V/div sensitivity.

TEKTRONIX 11A34 300MHz 4 Channel Amplifier, has a minor front panel $ 110
blemish but works fine.

TEKTRONIX 11A52 Two Channel DC-600MHz Amplifier, 11000-series $ 210

TEKTRONIX 11A72 Two Channel DC-1GHz Amplifier, 11000-series $ 250

TEKTRONIX R7103 3-slot 1 GHz rackmount scope $ 350

TEKTRONIX 7104 4-slot 1 GHz scope, standard unit $ 575

TEKTRONIX R7603 100MHz scope, rackmount (7603)
– with Opt. 06 Spectrum Analzer Graticule $ 200

TEKTRONIX 7834 400MHz storage scope mainframe $ 220

TEKTRONIX 7844 400MHz Dual Beam scope mainframe, benchtop version $ 245

TEKTRONIX 7903 (R7903) 3-slot 500MHz scope mainframe, rackmount $ 225

TEKTRONIX 7904 4-slot 500MHz scope mainframe $ 235

TEKTRONIX 7934 500MHz storage scope mainframe, fastest analog storage $ 370
scope made.

TEK 7000-Series Plugins
TEKTRONIX 7A11 Amplifier with integral FET Probe, 250 MHz $ 120

TEKTRONIX 7A12 Dual-trace 100MHz Amplifier $ 60

TEKTRONIX 7A13 Differential Comparator (LED display) $ 75

TEKTRONIX 7A14 Current Probe Amplifier, 25Hz-120MHz bandwidth, $ 90
1mA-1A/div. in 10 steps.

TEKTRONIX 7A16A 225 MHz Amplifier $ 50

TEKTRONIX 7A17 150-MHz customizable Amplifier $ 60

TEKTRONIX 7A19 500 MHz Amplifier, 50 ohm input $ 70
– with option 4 Variable Delay $ 85

TEKTRONIX 7A21N Direct Access Plugin, 1 GHz $ 80

TEKTRONIX 7A22 Differential Amplifier $ 95

TEKTRONIX 7A24 Dual 400 MHz Amplifier, 50 ohm inputs $ 100

TEKTRONIX 7A26 dual 200 MHz Amplifier $ 80

TEKTRONIX 7A29 1 GHz Amplifier, 50 ohm inputs $ 150

TEKTRONIX 7A29P 1GHz Programmable Amplifier $ 185

TEKTRONIX 7A42 Logic-Triggered Amplifier, 4-channel 350MHz bandwidth, $ 295
fastest and most flexible plugin for 7000-series mainframes, xlnt.

TEKTRONIX 7B10 Timebase, 1 GHz triggering $ 150

TEKTRONIX 7B15 Delaying Timebase, 1-GHz triggering $ 170

TEKTRONIX 7B53A Dual Timebase, 100 MHz triggering $ 75

TEKTRONIX 7B70 Timebase, 250 MHz triggering $ 50

TEKTRONIX 7B71 Delayed Timebase ” $ 60

TEKTRONIX 7B80 Timebase, 400 MHz triggering $ 75

TEKTRONIX 7B85 Delayed Timebase, 400 MHz triggering $ 90
– 7B85 Op/svc manual, $20

TEKTRONIX 7B92A Dual Timebase, 500 MHz triggering $ 90

TEKTRONIX 7D01 Logic Analyser with DF2 Display Formatter $ 100

TEKTRONIX 7D11 Digital Delay plugin, time or events based, 100nS to $ 75
1Sec with 1nS resolution.

TEKTRONIX 7D13 Digital Multimeter plugin $ 60

TEKTRONIX 7F10 Opto-Electrical Converter, 825-1500nM wavelength, 1GHz $ 325
bandwidth (mainframe-dependent), excellent.

TEKTRONIX TM500 & TM5000 Series

TEKTRONIX AM502 Differential Amplifier, $ 180
Diff inputs, 1X to 100,000X gain, selectable hi- and lo-pass filters.

TEKTRONIX DC5009 Programmable Counter Timer, $ 165
100uHz-135MHz, TM5000 plugin, GPIB-programmable.

TEKTRONIX DC510 350MHz Counter, 9 digits display, 3.125nS single $ 285
shot TI resolution, ovenized timebase.

TEKTRONIX FG504 40MHz Function Generator, 0.001Hz – 40MHz, 10mV to $ 295
30VPP output, linear/log sweeps, and more. See a nice overview here

TEKTRONIX PG501 50MHz Pulse Generator,  $ 90

TEKTRONIX PS503A Triple Power Supply, $ 100
Dual tracking 0-20VDC @ 1A and fixed 5V @ 1A sections.

TEKTRONIX PS5004 Precision Power Supply, $ 275
0-20VDC in 1mV steps,0.01% accuracy, GPIB programmable, 305ma max current.

TEKTRONIX SC503 op/service manual $ 30

TEKTRONIX SG505 Ultra-Low Distortion Oscillator,  $ 320
10Hz-100KHz, 10dB stepped attenuator, grounded/floating operation.

TEKTRONIX SI5010 Programmable Scanner   $ 75

TEKTRONIX TM5006 6-slot Power Mainframe with GPIB
– with option 12 (rear signals interface and rackmount) $ 210

TEKTRONIX TM5006A 6-slot Power Mainframe with GPIB
– with option 12 (rear signals interface and rackmount) $ 260

TEKTRONIX TM503 3-slot power mainframe $ 60

TEKTRONIX TM503B 3-slot power mainframe with tilt/carry handle $ 80

TEKTRONIX TM504 4-slot power module w/ tilt bale $ 75
– with Option 02 Rear Signals Interface $ 85
– op/service manual, $15

TEKTRONIX TM506 6-slot Power Module $ 110
– w/ Option 02 rear signals interface $ 125

TEKTRONIX TM506A 6-slot Power Module w/ Option 10 rackmount $ 150

Posted in Test Equipment

FLUKE

FLUKE 410B HV Power Supply, $ 595
0-10kV @ 10mA max, four decades plus vernier adjustment.

FLUKE 415B HV Power Supply,  $ 295
0-3.1kV in 1V steps, with 30mA max. current output.

FLUKE 4265A Programmable Power Source with options 01 (Isolated $ 195
Control) and 02 (Front Display Panel).

FLUKE 45 Soft Carrying Case (option C40). Nice cases with zippered $ 15
accessory pouch, strap eyelets.

FLUKE 80E Voltage Divider, $ 325
Precision DC high voltage divider, 10kV max input, 1000:1 and 10000:1 outputs.

FLUKE 8920A Wideband True RMS Digital Voltmeter, $265
2Hz-20MHz, analog and digital metering, selectable reference impedances.

 FLUKE 893A AC-DC Differential Voltmeter, $ 125
Conventional or diff measurement of AC voltages from 1mV to 1100V, and DC from
10uV to 1100V. With original manual and power cord.

Posted in Test Equipment

WAVETEK

WAVETEK 166 Pulse / Function Generator,  $ 325
Lin/log sweeps, variable transition time pulses, the most capable analog generator ever (IMO).

WAVETEK 1865 CATV Sweep Analyzer. 5-450 MHz; 5, 50, and 270MHz pilot $ 320
freq’s installed. Nice clean unit with BC-2 car lighter adapter,
camera hood, operating manual, calibration cable, carry strap, and
case with covers. Battery not guaranteed.

WAVETEK 288 Synthesized Function Generator, 2mHz-20MHz, AM, FM, $ 325
sweep, phase lock, balanced & unbal output to 30V p-p, GPIB, nice.

WAVETEK 452 Dual Hi/Lo Variable Filter, two channels 0.1Hz-111kHz, $ 185
111KHz, select 0/20dB gain, flat amplitude/flat delay, with feet
and tilt bales.

WAVETEK 801 Pulse Generator, 50MHz, nice flexible unit with variable $ 125
transition times.

WAVETEK 98 Synthesized Power Oscillator, low-distortion 1uHz to $ 295
1.1MHz, 15VPP into 50 Ohms unbalanced, transformer balanced 30VPP
into 600 Ohms, selectable EU, programmed lin/log sweep, GPIB, and
more.

ROCKLAND 24D Tracking Low Pass Filter, GPIB or front panel control, $ 125
internal or externally strobed, open or closed loop, selectable
order, gain, phase, etc.

ROCKLAND 2582 Programmable Eighth Order Bessel Lopass Filter, $ 295
two channels, programmable input range, cutoff frequency (1Hz-100kHz),
output range, 100 storage registers, floating or grounded inputs,
GPIB or RS-232 remote control, with feet and tilt bale. Current product, see: 2582 Specs

Posted in Test Equipment

KROHN-HITE / EDC

EDC 2902 DC Voltage Calibrator with built-in Galvanometer. Six digits $ 495
resolution in 100mV, 1V, 10V, and 100V ranges, 0.002% accuracy,
10ppm/hr. stability. A nice self-contained DC calibrator.
With op/service manual.

EDC MV216A DC Voltage Standard, 10mv, 1V, and 10V full-scale ranges $ 325
with 6 digits resultion in each, selectable polarity, with front cover.

KROHN-HITE 3323 2-Channel Variable Filter (separate power supplies, $ 235
even.) .01Hz – 99.9kHz, 2 lopass & 1 hipass modes, 0 or 20dB gain,
24dB/octave, switchable ground lift, excellent.

KROHN-HITE 3342 2-Channel Variable Filter (separate power supplies, $ 260
even.) .01Hz – 99.9kHz, 2 lopass & 1 hipass modes, 0 or 20dB gain,
48dB/octave, switchable ground lift, with rack ears.

KROHN-HITE 7500 Amplifier, $ 975
75 watts/125VRMS to 100kHz, 10 watts to 1MHz, fixed x10, x100 or variable gain,
AC or DC input coupling.

Posted in Test Equipment

GENERAL RADIO (Genrad)

GR 1432X Decade Resistor, $ 150
6 decades, 0.1 Ohm/step to 10k Ohms/step.

QUADTECH 1433N Decade Resistor, $ 250
5 decades, 0.01 Ohm/step to 100 Ohms/step, with rackmount ears.

GR 1560-P21 Vibration Control Box for 1560-P51 Vibration Pickup $ 40

GR 1560-P98 accepts 1″ Ceramic Mic Capsule, output to a GR874 $ 20

GR 1644A Megohm Bridge, $ 350
Measure resistance to 50 TerraOhm in ten ranges with builtin test
voltages 10-1000 VDC. Download the manual here.

GENRAD 1658 RLC Digibridge/LCR Meter, 5 digit displays, 120Hz/1kHz $ 275
frequencies, autoranging, builtin Kelvin fixture, selectable
DC bias, binning. In xlnt shape and good cal. with operating
instructions.

GR M2G2-MFP Dual Ganged 400Hz Variac, two 120VAC 2.4A 400Hz variacs $ 85
on a common shaft with knob, looks brand new unused.

Posted in Test Equipment

ANALOGIC / DATA PRECISION

ANALOGIC 2020-100 Polynomial Waveform Synthesizer, $ 420
Generates standard and arbitrary waveforms created from math equations, or loaded
via GPIB. 100MSa/sec max rate, 12 bit resolution, 128K data points, with
op/programming manual.

DATA PRECISION 610 Digitizing Preamp, 2-channel 14-bit 100kS/S plugin $ 140

DATA PRECISION 611-1 Digitizing Preamp, 4-channel 14-bit 100kS/S  $ 195

DATA PRECISION 6000 Waveform Analyzer,  $ 335
Completely programmable, 9″ display, IEEE-488 i/o, versatile plugin digitizing preamps.

DATA PRECISION 6000A Waveform Analyzer, $ 395
Has higher-speed processor, 240k data point memory, and 48kB nonvolatile memory.

DATA PRECISION 6100 Waveform Analyzer,  $ 450
The 6000’s big brother adds a faster processor, 240k data points memory, floppy interface,
48kB nonvolatile memory, and expanded HPGL plotter support.

DATA PRECISION 6100B Waveform Analyzer, $ 525
(identical to a 6500) 240k data points memory, high-speed DSP coprocessor, 230MB
hard drive, and expanded HPGL plotter support.

DATA PRECISION 681 Dual Disc Drive for Data 6000/6100 waveform $ 125
analysers. Allows local storage of setups and data for instant recall.
Connects to mainframe controller via 50-pin SCSI cable.

Posted in Test Equipment

NATIONAL INSTRUMENTS

NATIONAL INSTRUMENTS GPIB-1014 VME GPIB Controller $ 150

NATIONAL INSTRUMENTS GPIB-110 Bus Extender, coax & fiberoptic inputs $ 100

NATIONAL INSTRUMENTS GPIB-PCII/IIA 488.2 Controller card for ISA $ 45
slot, with drivers for DOS thru Win98. Current product, see
details here

NATIONAL INSTRUMENTS MXI-2/M1 Cable, $ 75
2 Meter Straight-Point to Straight-Point Connector. See details here

NATIONAL INSTRUMENTS SH96-96 SCXI Cable, $ 50
5 Meter 96-pin SCXI module to 96-pin TBX terminal block, part # 183228-05. See details here

NATIONAL INSTRUMENTS TBX-96 Connector Block, $ 95
Mass termination DIN-Rail Mountable SCXI Connector Block. See details here

NATIONAL INSTRUMENTS PCMCIA-GPIB Controller with 2 meter cable, with $ 150
drivers available for DOS thru XP. Current product, details here

NATIONAL INSTRUMENTS PCMCIA-GPIB Controller with 4 meter cable, with $ 160
drivers available for DOS thru XP. Current product, details here

NATIONAL INSTRUMENTS AT-GPIB card, manuals / drivers for Microsoft $ 25
OS’s are here.

Posted in Test Equipment

KEITHLEY

KEITHLEY 175 Autoranging Multimeter, 4-1/2 digits, 300KHz True RMS $ 95
RMS AC w/ dB, with GPIB option, good cal, very nice.

KEITHLEY 193 System DMM, 6.5 digit meter with GPIB and options 1930 $ 275
(TrueRMS AC) and 1931 (AC and DC current measurement), with operating
and programming reference instructions.

KEITHLEY 225 Current Source, 10nA-100mA, 10-100V compliance, three $ 180
digits plus vernier resolution.

KEITHLEY 228A Voltage/Current Source, $ 850
Sources or sinks 100W, voltage 1mV-101V, current 100uA-10.1A, 0.1% accuracy.
With output connector plugin.

KEITHLEY 230 Programmable Voltage Source, 50uV-101V in 4 ranges $ 700
with 4.5 digits resolution per range, current limiting to 100mA
in 3 ranges, 100 stored programs, GPIB, nice.

KEITHLEY 247 HV Power Supply, 0-3kV @ 6mA max, very nice $ 325

KEITHLEY 260 Nanovolt Source, 1nV – 1.11V, 3 digits resolution in 9 $ 195
ranges, nice.

KEITHLEY 261 Picoampere Current Source, nice $ 200

KEITHLEY 3321 LCZ Meter, 120Hz-100kHz measurement frequencies, 4-1/2 $ 795
digits resolution, open/short compensation, internal bias, GPIB
i/o, and more. Download the op manual here and the service
manual here.

KEITHLEY 485 Picoammeter, 2nA – 2mA FS ranges, auto-ranging, nice
– standard unit, display has minor blemish but reads fine $ 375

KEITHLEY 705 Scanner w/ GPIB. Has two 7054 High-Voltage cards, and $ 275
includes a few cables with HV-BNC connectors and one Keithley triax
cable.

KEITHLEY 7164 20-channel Scanner card for 706 Scanner $ 60

Posted in Test Equipment

LECROY

LECROY 9100 Arbitrary Function Generator, two channels, 100MHz $ 425
bandwidth, 200 MSa/sec, 512 K Memory depth, GPIB or RS-232 i/o.
Iincludes 9100/CP Keypad for local programming and Easywave DOS
software for waveform editing and transfer. Rackmount, excellent.
Download the op/pgm manual here.

LECROY 9310 Digital Scope, 300MHz BW, 100MSa/sec sampling, GPIB and $ 420
RS-232 i/o, 2 channels, nice compact footprint. One minor front
panel blemish but otherwise very good.

LECROY 9310A Digital Scope, 400MHz BW, 100MSa/sec sampling, GPIB and $ 460
RS-232 i/o, 2 channels, nice compact footprint, excellent.

Posted in Test Equipment

WAYNE KERR

WAYNE KERR 4N3260TS Transfer Standard Capacitors, each kit has two $ 30
matched 150pF capacitors for calibrating the WK 3260 Precision
Magnetic Analyzer.

WAYNE KERR 1005 Component Fixture, builtin radial/axial adapters, $ 195
can be used with any LCR/Z meter with 4-terminal BNC Kelvin
connection.

WAYNE KERR 2705 Chip Component Tweezers with 1042 Fixture Adaptor, $ 210
adapts any WK 4200-series meter to measure surface mount and chip-
type components. Plugs into the builtin Kelvin Fixture.

WAYNE KERR 4210 LCR Meter, benchtop impedance meter has 120Hz, 1kHz, $ 335
and 10KHz frequencies, xlnt builtin Kelvin fixture, open/short
fixture compensation, 5-digit display, GPIB interface, internal
2VDC bias, 30 test setup memories, binning, excellent. With op/pgm
instructions. Download the data sheet here

WAYNE KERR 4225 LCR Meter, benchtop component meter has 120Hz, 1kHz, $ 265
and 10kHz measurement frequencies, builtin Kelvin fixture for radial
and axial components, 5-digit display, internal 2VDC bias, pass/hi/lo
limit testing, and more. Download the data sheet here

WAYNE KERR 4250 LCR Meter, WK’s best benchtop impedance meter has $ 475
120Hz-100KHz frequencies, builtin Kelvin fixture plus 4-terminal
BNC connectors, open/short fixture compensation, 5-digit display,
internal 2VDC bias, 30 test setup memories, binning, RS-232 and GPIB
interfaces, with op/program manual, excellent.

Posted in Test Equipment